Flexible Rubber Automotive Weather Stripping – 1 m × 19 mm

Flexible Rubber Automotive Weather Stripping – 1 m × 19 mm

 (4789 Reviews)
$22.97
$22.97 $38.28
SAVE 39% Sold out

🚘 Neater Edges — Refresh compatible fixed gaps with a clean black finish.
〰️ Flexible Rubber — Follow compatible contours with a bendable strip.
🔴 Peel-and-Press Backing — Two adhesive bands with removable liners.
📏 Clear Sizing — 1 m long and 19 mm wide overall.
✂️ Cut to Fit — Measure, test the fit and trim as needed.

⚡ LIMITED STOCK
🔥 Most customers love this product
8,535 viewing now

BUNDLE & SAVE

Pay with
Flexible Rubber Automotive Weather Stripping – 1 m × 19 mm

Flexible Rubber Automotive Weather Stripping – 1 m × 19 mm

$22.97
$22.97 $38.28
SAVE 39% Sold out

A closer fit. A cleaner finish.

Flexible Rubber Automotive Weather Stripping

Refresh compatible fixed edge gaps with a flexible black strip and peel-and-press backing. Start with your measurements, then follow the contour.

1 m length19 mm overall widthBlack rubber
Hands positioning black weather stripping along a fixed windshield edge, with red adhesive liners visible.

Start at the edges

Small gaps deserve a closer look.

Visible gaps, dust along the edge and uneven trim can interrupt a well-kept finish. Check the condition and shape of the area before choosing a strip.

Exposed edges

Identify the fixed gap you want to cover.

Surface buildup

Clean and dry the contact area before fitting.

Uneven trim

Check that the profile suits the existing edge.

Examples of exposed gaps, dust at edges and untidy windshield trim.

The finished look

A neater line along the gap.

A carefully aligned strip creates a continuous black edge where the profile fits. The illustrated result includes cleaning, fitting and pressing the strip into place.

Appearance depends on the original surface, gap shape and installation.

Illustrated edge appearance before and after cleaning and fitting the strip.

Three details, one strip

Flexible shape. Practical backing.

Explore the visible construction before you plan your project.

Flexible body

The black rubber body bends to follow compatible contours. Keep the strip relaxed as you position it.

Adhesive bands

Two adhesive bands run along the underside, protected by red peel-away liners. Remove the liners as you apply the strip.

Center rib

A center rib is visible between the adhesive bands. Compare the profile with your gap before removing the liners.

Flexible black strip with two adhesive bands, peel-away red liners and a center rib.

Choose by profile

Flat tape or a shaped strip?

Match the product to the job by checking its shape and contact surfaces.

Visible design comparison
Plain flat tape This weather strip
Flat profile Shaped profile with a center rib
One continuous adhesive face Two adhesive bands
General surface coverage Compatible fixed edge gaps
Flat adhesive tape compared with the shaped weather strip and its two adhesive bands.

Measure first

Know the size before you fit.

Check the length you need, the overall strip width and the gap profile. Overall width is not the same as the gap opening.

Strip length1 mApprox. 3.28 ft
Overall width19 mmApprox. 0.75 in

Metric measurements shown.

  • Measure the full edge you plan to cover.
  • Compare the profile and adhesive contact areas with your gap.
  • Test the fit before peeling the liners.

Measurements describe the strip shown. Refer to your selected option for the purchased quantity.

Specifications: 1 meter length and 19 millimeters overall width.

Installation overview

Prep. Fit. Peel. Press.

Work along the edge in short sections, with the strip aligned and relaxed.

1 · Clean

Clean the contact surfaces and allow them to dry. Check the existing trim and the intended contact area.

2 · Measure

Measure the intended edge and test the profile. Cut to the required length after checking the fit.

3 · Peel

Peel back the red liners gradually to expose the two adhesive bands. Avoid touching the exposed adhesive.

4 · Press

Align the strip with the compatible fixed edge and press along its length. Do not stretch it as you apply it.

Select a step for its explanation. Cloth, measuring tape and scissors shown are preparation tools; included accessories have not been specified.

Four installation stages: clean and dry, measure and cut, peel the liners, align and press.

Everyday vehicle care

A small detail for a well-kept ride.

For drivers who enjoy a hands-on refresh: check the fit, prepare the surface and finish the edge with a clean black line.

Hands-on fittingClean black finishMeasure before ordering
An adult fitting black trim along a stationary vehicle windshield edge.

Good to know

Questions before you fit?

Fit depends on the gap dimensions, profile and contact surfaces. Compare these with the 19 mm overall width and the illustrated underside. Vehicle compatibility is not confirmed by model.

The supplied specification is 1 m long (approximately 3.28 ft) and 19 mm wide overall (approximately 0.75 in). Check your selected option for the quantity you are purchasing.

No. The visible strip is black. The red material shown is the peel-away liner protecting the adhesive bands.

The supplied installation image shows measuring and cutting the strip. Test the fit and measure your edge before cutting.

Clean and dry the contact area, compare the profile with the gap and test the alignment before removing the liners. Follow any installation guidance supplied with your order.

Measure the total edge length, check the gap profile and confirm that both adhesive bands have suitable contact areas. Review your selected option for the quantity included.

Make the details count

Measure your edge. Plan your refresh.

Flexible black rubber, peel-and-press backing and a profile to check against your project.

 

View full details